MONTANA UV-EFFECT SPRAY - 400 ML - TRANSPARANT SEMI GLOSS

Montana UV-EFFECT

Transparent UV-spray with fluorescent effect is only visible under incident UV light.

Montana UV-EFFECT is a transparent effect paint that is only visible under direct UV light. Able to be sprayed on nearly any substrate, the colorless and semi-gloss paint is not visible in sunlight rather illuminates when exposed to UV light with a glowing, blue-purple color. Ideal for indoor use, the luminous spray can be a great tool not just for making art or art happenings, but also in practical contexts such as Guerilla Marketing, night clubs, venue and property marking.


The Montana UV effect Spray can be applied to numerous substrates such as coated and uncoated screens, masonry, wood, glass and more. The UV light effect becomes more prevalent, the more coats are applied particularly when applied with a stencil. Due to the UV EFFECT’s semi-gloss finish, the UV EFFECT spray can be slightly visible if painted on a matt substrate. The application of the Montana GLOSS Varnish can be used to create an all over gloss finish which discretely hides the UV spray under one gloss coat. The UV EFFECT spray is compatible with other color and effect coatings within the MONTANA CANS range as long as total curing time has occurred. (24-48 hours). The Montana UV EFFECT spray Available in the usual 400ml can format for easy and comfortable use.

Applying in thin, multiple layers will enhance and increase the UV EFFECT sprays ability to produce a vibrant glow effect. Always test spray on a non-visible area to check compatibility of lacquer or paint.

For optimal lifespan, always make sure to store with the nozzle on the can.

1. The safety ring is easy to remove - just lift up the nozzle and turn the spray can up side down and the ring will fall out.
2. The ring helps to avoid accidental triggering in transport or storage.
3. Turn the can upside down. Strike the bottom of the can against the palm of your other hand.
4. Repeat this several times to make sure to loosen up the ball bearings* from the pigments in the can.
5. Once the ball bearings* are loose, keeping the can turned upside down (advantage of gravity) and shake.
6. Then shake the can vertically for at least 2 minutes.
7. After you have shaked the can well put the nozzle back on the can. Fix carefully with your finger and make sure that it fits.
8. Make sure to always do the first spray on a test surface first, as the top of the valve system may harbor more solvent than pigment on the first shot. This is normal.

Product details

• Content 400ml
• 1 can
• For indoor use
• horizontal en vertical spray 
• Dustdry after 10 minutes, touch dry after 60 minutes
• Please use personal protection when applying like gloves, mask and safety glasses
• UV-reactive so not glow in the dark without blacklight